eli5cars.com

2021 Honda Odyssey maintenance schedule

Written in plain English and reviewed by the eli5cars editorial team ยท Last reviewed June 2026

3.5L V6 (J35Y6, 280 hp) + 10-speed automatic, FWDLXEXEX-LMSRP $31,110

Jump to a mileage milestone:

Full service timeline

MileageService itemsDetails
8k mi
  • Engine oil and filter change โ€” 0W-20 full synthetic (Honda Genuine); interval governed by the Honda Maintenance Minder System, which triggers Item A/B once calculated oil life drops to 15% โ€” 7,500 mi is the typical ceiling under normal use
  • Reset Maintenance Minder after service
  • Check tire pressure and condition, adjust to door-placard spec
  • Inspect all fluid levels: coolant, brake fluid, power steering (if equipped), washer fluid
  • Inspect windshield wipers
15k mi
  • Engine oil and filter change per Maintenance Minder (0W-20 full synthetic)
  • Tire rotation (Maintenance Minder Item 1)
  • Inspect front and rear brake pads, rotors, and calipers
  • Inspect suspension components and steering linkage
  • Inspect CV axle boots
30k mi
  • Engine oil and filter change per Maintenance Minder (0W-20 full synthetic)
  • Tire rotation
  • Replace engine air filter (Maintenance Minder Item 5)
  • Replace cabin air filter (Item 4)
  • Inspect 10-speed automatic transmission fluid (Honda ATF DW-1) โ€” level and condition
  • Inspect serpentine drive belt for cracking or glazing
  • Inspect brake fluid condition
View โ†’
60k mi
  • Engine oil and filter change per Maintenance Minder (0W-20 full synthetic)
  • Tire rotation
  • Replace cabin air filter
  • Replace engine air filter
  • Replace brake fluid โ€” DOT 3 (Honda recommends every 3 years regardless of mileage)
  • Inspect spark plugs โ€” iridium tipped; factory replacement interval is 105,000 mi, visual inspection only at this point
  • Inspect 10-speed ATF (Honda ATF DW-1) condition and level; replace early if towing or other severe-duty use
  • Inspect timing belt for surface cracking, glazing, or fraying โ€” factory replacement interval is 105,000 mi / 7 years, whichever comes first
View โ†’
90k mi
  • Engine oil and filter change per Maintenance Minder (0W-20 full synthetic)
  • Tire rotation
  • Inspect serpentine drive belt
  • Inspect all suspension bushings, ball joints, and tie rod ends
  • Inspect 10-speed automatic transmission fluid; replace now if operated under severe-service conditions (towing, heavy stop-and-go, extreme heat)
View โ†’
105k mi
  • Replace timing belt โ€” Honda's factory interval for the 3.5L V6 (J35Y6) SOHC engine is 105,000 miles or 7 years, whichever comes first. This is a real, non-optional major service: the J35 is an interference engine, and a broken or jumped belt causes valve-to-piston contact and severe internal damage. Do not defer it.
  • Replace timing belt tensioner and idler pulley(s) โ€” Honda recommends concurrent replacement with the belt itself
  • Inspect (and, per most independent Honda shops, replace) the water pump โ€” it shares access with the timing belt on this engine, so replacing it now avoids a second labor-intensive teardown later
  • Replace spark plugs โ€” iridium, factory interval 105,000 mi; commonly combined with timing belt service since the intake manifold is already partially disassembled
  • Replace serpentine accessory drive belt if not already done
120k mi
  • Engine oil and filter change per Maintenance Minder (0W-20 full synthetic)
  • Tire rotation
  • Replace engine coolant โ€” Honda Long Life Coolant Type 2
  • Replace 10-speed automatic transmission fluid (Honda ATF DW-1) under normal-service schedule
  • Full brake inspection: pads, rotors, calipers, lines, master cylinder
  • Inspect wheel bearings front and rear
  • Inspect HVAC system and rear A/C unit (if equipped)
View โ†’

Check engine light on? Get a free code scan

If your check engine light is on, most auto-parts stores (AutoZone, O'Reilly, Advance) will read the code for FREE โ€” no purchase required, just walk in. Bring the code back here and look it up at eli5cars.com/obd2 for the plain-English explanation.

Note: a scan only helps when there's an active fault code. For purely mechanical symptoms (noises, vibrations, leaks), a scan may show nothing โ€” the suspects listed above are your starting point.