2020 Nissan Altima
120,000 mile service checklist
Here's exactly what your factory maintenance schedule calls for at this mileage — and what each item typically costs.
120,000 mile service
- Engine oil and filter change — 0W-20 full synthetic
- Tire rotation
- Replace spark plugs — 2.5L iridium second set (if first replaced at 90k); 2.0L VC-Turbo second set
- Replace CVT fluid — Nissan NS-3 (third service cycle; CVT fluid condition is critical past 100k — fluid degradation accelerates clutch pack wear in the Jatco JF017E/JF018E units used in the 2020 Altima)
- Replace coolant — Nissan Long Life Coolant flush and refill
- Replace serpentine drive belt
- Replace brake fluid — DOT 3 full flush
- Replace AWD rear differential fluid (AWD models)
- Full brake inspection: pads, rotors, calipers, parking brake cables
- Inspect EVAP system and fuel cap seal
- Inspect CV axle boots and joints front and rear (FWD and AWD)